Honeywell MI-LPB2-S2I BEAM DET ANL-AP MOR

BEAM DET ANL-AP MOR

Rp. 21.971.524

Condition: New

Shipping Weight: 2 kg(s)

Brand: HONEYWELL

Share:

Operating Voltage Range 15 to 32VDC (24VDC nominal)        15 to 29VDC if using built-in isolators
Typical Standby Current 2mA @ 24VDC (No communications, LED off)
Maximum Alarm Current (LED on) 8.5mA

Application Temperature Range -30°C to +55°C
Humidity 0 to 95% Relative Humidity (non condensing)
IP Rating IP54

MI-LPB2-S2I is an addressable reflector-type linear optical beam smoke detectors designed to operate as a component of an intelligent fire alarm system. They operate primarily on the principle of light obscuration utilising an Infra-Red beam. Optical beam smoke detectors are particularly appropriate for protecting buildings with large open spaces such as warehouses, atriums etc.
The MI-LPB2-S2I is a combined transmitter/receiver units that can be directly connected to an analogue loop circuit. The Infra-Red transmitter generates a beam of light towards a high efficiency reflector. The reflector returns the beam to the receiver where an analysis of the received signal is made. The change in the strength of the received signal is used to determine the alarm condition.

Write Your Question